Dev48
Language
  • About
  • Services
  • Industries
  • Technologies
  • Articles
  • Contacts
Book a call
    Home/Articles/Ptc and ansys iiot digital sim platform solution
Dev48
info@dev48.org+375 29 320-40-96WhatsApp@isky_by

© 2026 · All rights reserved.

PTC and ANSYS IIoT Digital Sim Platform Solution

Source: PTC•October 6, 2026 at 12:21 AM

PTC and ANSYS IIoT Digital Sim Platform Solution

Solution Builders to Execute Simulation Models for Industrial IoT Applications

PTC and ANSYS to Develop Platform Solution Enabling Digital Simulation for the Industrial Internet of Things

May 16, 2017

Solution Builders to Execute Simulation Models for Industrial IoT Applications

NEEDHAM, Mass. and PITTSBURGH – May 17, 2017 – PTC (NASDAQ: PTC) and ANSYS (NASDAQ: ANSS) today announced a solution that will enable ANSYS engineering simulation technology to be rapidly added to applications built on the ThingWorxIndustrial Internet of Things (IoT) platform from PTC. The development of a connector between these two technology platforms will enable customers to transform raw data into new forms of actionable intelligence. The connector will integrate intelligent digital simulation models with products as they exist and operate in the real world. This will open up new opportunities for companies to create value by enabling them to optimize operations and maintenance and to integrate them into their product development processes.

Simulation helps companies understand situations that may occur – such as a product failure – as early as the design phase. When faced with limited access to rich historical data, companies can leverage simulation models to generate an initial “as designed” set of expected outcomes or product performance. The results of these simulations act as a rich source of data that can be used for supervised machine learning and predictive modeling. The ongoing connection between real-world performance, simulation, and machine learning helps companies make sense of data that can lead to predictive models and a more insightful feedback loop, enabling them to improve product design and modeling.

The IoT is making it possible to create a digital twin that combines real-time data about a physical product with the organization’s digital information about the product. Simulating digital twins provides advanced intelligence and insight into a product’s behaviors. The combination of the ThingWorx platform capabilities with ANSYS simulation models will enable companies to deploy powerful applications that can analyze current operating conditions, rapidly identify and diagnose operations issues, predict future operating conditions, and improve product performance. PTC and ANSYS will make the capabilities of this solution available within IoT applications developed on ThingWorx.

“Obtaining value from the data generated by connected products is one of the primary reasons companies invest in the Industrial IoT,” said Catherine Kniker, chief revenue officer, Platform Business, PTC. “Simulation technology combined with machine learning can help Industrial IoT solution builders identify and make sense of the data needed to improve product design and performance – and develop next-generation products. We look forward to seeing how solution builders will create new value by introducing our solution with ANSYS, a preferred simulation partner, into their applications.”

“Many of our customers are looking to digital twins to disrupt their industries by drastically lowering their operating and maintenance costs and by marketing their products as optimized services in real time,” said Eric Bantegnie, ANSYS general manager. “By leveraging the solution that ANSYS and PTC will bring to the market, our customers will bring powerful capabilities to new Industrial IoT applications. We look forward to demonstrating the value of this solution at LiveWorx17.”

ANSYS is an elite sponsor at LiveWorx17. To see a demonstration of the simulation and machine learning joint solution, as well as ANSYS’s broader Industrial IoT portfolio, please visit booth 345 on the Xtropolis show floor.

The timing of any product release, including any features or functionality, is subject to change at PTC’s discretion.

Additional Resources

  • ThingWorx Industrial IoT Platform
  • ANSYS – Simulation Driven Product Development

About ANSYS, Inc.

If you’ve ever seen a rocket launch, flown on an airplane, driven a car, used a computer, touched a mobile device, crossed a bridge, or put on wearable technology, chances are you’ve used a product where ANSYS software played a critical role in its creation. ANSYS is the global leader in engineering simulation. We help the world’s most innovative companies deliver radically better products to their customers. By offering the best and broadest portfolio of engineering simulation software, we help them solve the most complex design challenges and create products limited only by imagination. Founded in 1970, ANSYS employs thousands of professionals, many of whom are expert M.S. and Ph.D.-level engineers in finite element analysis, computational fluid dynamics, electronics, semiconductors, embedded software and design optimization. Headquartered south of Pittsburgh, Pennsylvania, U.S.A., ANSYS has more than 75 strategic sales locations throughout the world with a network of channel partners in 40+ countries. Visit for more information.

About PTC (NASDAQ: PTC)

PTC has the most robust Internet of Things technology in the world. In 1986 we revolutionized digital 3D design, and in 1998 were first to market with Internet-based PLM. Now our leading IoT and AR platform and field-proven solutions bring together the physical and digital worlds to reinvent the way you create, operate, and service products. With PTC, global manufacturers and an ecosystem of partners and developers can capitalize on the promise of the IoT today and drive the future of innovation.

PTC.com @PTC Blogs

PTC, ThingWorx, and the PTC logo are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the United States and other countries.

ANSYS and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. All other brand, product, service and feature names or trademarks are the property of their respective owners.

← All articles

What this article says

More in Industrial & Industry 4.0

All →
A Comprehensive Guide to ICS Protection | Rockwell Automation | US
Rockwell Automation

A Comprehensive Guide to ICS Protection | Rockwell Automation | US

Rockwell Automation Signs Definitive Agreement to Acquire AGILOX | Rockwell Automation | US
Rockwell Automation

Rockwell Automation Signs Definitive Agreement to Acquire AGILOX | Rockwell Automation | US

Continuously Measuring Cross-Sections Immediately After Extrusion: Measuring Wall Thickness, Width, and Corner Radius, and Feeding Back to Die Adjustment
Keyence

Continuously Measuring Cross-Sections Immediately After Extrusion: Measuring Wall Thickness, Width, and Corner Radius, and Feeding Back to Die Adjustment

Judging Exterior Deformation by Depth: Managing Swelling, Wrinkles, Dents, and Depressions With Thresholds
Keyence

Judging Exterior Deformation by Depth: Managing Swelling, Wrinkles, Dents, and Depressions With Thresholds

Measure Wood Shapes to Increase Yield Rate: From Log Profiles to Finished Thickness
Keyence

Measure Wood Shapes to Increase Yield Rate: From Log Profiles to Finished Thickness

Measure and Track Guide Rail Wear Numerically: Capture Degradation Through the Cross-Sectional Shape of the Raceway Surface
Keyence

Measure and Track Guide Rail Wear Numerically: Capture Degradation Through the Cross-Sectional Shape of the Raceway Surface

More from PTC

Agile Development: Develop Hardware Like Software
PTC

Agile Development: Develop Hardware Like Software

Mathcad API in Action
PTC

Mathcad API in Action

ABI Report: PTC Named Top Generative Design Solution
PTC

ABI Report: PTC Named Top Generative Design Solution

PTC Announces Third Fiscal Quarter 2026 Results
PTC

PTC Announces Third Fiscal Quarter 2026 Results

PTC Orbit for MedTech: AI-Powered Post-Market Intelligence
PTC

PTC Orbit for MedTech: AI-Powered Post-Market Intelligence

PTC Announces Second Fiscal Quarter 2026 Results
PTC

PTC Announces Second Fiscal Quarter 2026 Results