In this article:
- How regenerative braking recovers energy as you drive
- What is regenerative braking, and how does it work?
- What are the benefits of regenerative braking?
- What are the limitations of regenerative braking?
- Why regenerative braking isn’t the same every drive
- Feel it for yourself in a Rivian
How regenerative braking recovers energy as you drive
Lift your foot off the accelerator in an electric vehicle (EV), and you may notice something: Instead of coasting, the vehicle begins to slow down and may come to a complete stop without you pressing the brake pedal. That’s regenerative braking in action.
It’s one of the first differences people notice about driving an EV. Unlike conventional braking, regenerative braking (or regen) captures some of the vehicle’s motion and converts it into electricity.
But how is that possible, exactly? Read on to learn how regenerative braking works, what affects energy recovery and how it changes the way you drive.
What is regenerative braking, and how does it work?
For regenerative braking explained in plain terms, follow the energy.
Every moving car carries kinetic energy. In a gas-powered car, slowing down usually sends most of that energy into the brakes, where friction turns it into heat. An EV can save some of it instead.
That’s the idea behind the energy recovery system. The electric motor that moves the EV forward can also work in reverse as a generator. Take your foot off the accelerator and the wheels keep turning, but they now spin the motor instead of the motor spinning them. The motor converts some of that motion into electricity and sends it back to the battery.
The result is a slowdown that does two things at once: It reduces speed while recovering energy that a friction-only braking system would simply turn into heat.
Rivian lets drivers adjust regenerative braking from the vehicle display. Turn regen up, and the slowing effect is stronger. Higher settings increase deceleration when you lift off the accelerator, while lower settings offer a gentler feel. Choose the level that feels most comfortable for you.
What are the benefits of regenerative braking?
The obvious benefit is getting some energy back instead of throwing all of it away as brake heat. But regen also changes how an EV feels to drive.
Longer driving range: Every time you slow down, some energy flows back to the battery. While you won’t fully recharge just by driving in the city, these small gains add up over a longer trip.
Reduces wear: Regenerative braking does much of the deceleration during normal daily driving, so the brake pads and rotors don’t have to work as hard.
Smooth driving: When you ease off the accelerator, the vehicle slows down and can come to a complete stop without pumping the brakes. In regular traffic, you might go a long time without needing to use the brake pedal.
Regenerative braking is only one part of EV efficiency. Battery temperature, aerodynamics, tires, speed and driving conditions all affect range and efficiency, too. An independent Edmunds range test of the R1S, for example, found that the vehicle traveled 330 miles, exceeding its EPA-estimated range of 321 miles.
The amount of energy returned changes from drive to drive. We’ll get into those variables below.
What are the limitations of regenerative braking?
Regenerative braking handles a lot of the everyday deceleration. It can’t handle every stop, though, and it isn’t always able to send the same amount of energy back to the battery.
That’s why every Rivian still has a robust friction braking system ready to step in.
A few situations put more of the work back on the brakes:
Emergency braking: Regenerative braking can't provide all the stopping force needed in an emergency. Pressing the brake pedal engages the friction brakes for additional stopping power.
A full battery: When the battery is full or nearly full, it can't accept as much recovered energy. Regenerative Braking Assist automatically uses the friction brakes to maintain a consistent slowing feel.
Cold temperatures: A cold battery may not be able to accept as much energy right away, limiting regen until things warm up.
Very low speeds: Regen becomes less effective as the vehicle approaches a complete stop.
You don't always want strong lift-off braking on snow or ice. Snow mode eases the accelerator response and regen to help the tires keep their grip. Our guide to Rivian Drive Modes shows how the vehicle adjusts when roads get slippery.
Why regenerative braking isn’t the same every drive
Regenerative braking efficiency changes with how and where you drive.
Ease off the accelerator early for a red light, and the vehicle has more time to send energy back to the battery. But brake hard at the last second, and the friction brakes have to work harder.
City driving gives regen plenty of chances to help, as you’re slowing down so often. On a highway run, you may go for miles without giving it much energy to recover.
A few other things change how much energy regen can send back to the battery:
Speed: Higher speeds can provide more energy to recover as you slow down. Gradual deceleration gives the system more opportunity to capture it.
Battery level: A nearly full battery can’t accept as much recovered energy. Once you’ve used some charge, more capacity becomes available.
Regen setting and Drive Modes: High regen creates stronger deceleration when you lift off the accelerator than Medium or Low. Snow mode reduces regen to help maintain traction on slippery roads.
Terrain: Downhill driving creates more opportunities for regen to recover energy as the vehicle descends and slows down.
When the U.S. Department of Energy looked at an EPA combined city-and-highway drive cycle, it found that about 22% of driving energyOpens in new tab was recovered through regenerative braking. Real roads are less tidy, so keep in mind the amount you recover may vary.
Feel it for yourself in a Rivian
Reading about regenerative braking only gets you so far. There’s nothing like experiencing it during a demo drive and feeling the vehicle slow without touching the brake pedal.
Watch the driver display to see when the vehicle is using power and recovering energy. The Energy app offers another view into where that energy is going and how efficiently you’re driving.
Try different regen settings on a familiar road. Notice how early you can lift off before a turn or red light — and how your driving changes as you get used to the rhythm.
Book a demo drive and experience regenerative braking for yourself.
Informational purposes only. The information provided in this article is intended for general informational purposes only. It does not constitute professional advice or expert guidance. Where appropriate, seek professional assistance. While we strive to ensure accuracy, we do not assume any responsibility or liability for any inaccuracies, omissions or errors in this content.
