Mission control portal now gives SIP operators more visibility and control: check registration status on every connection, include hold time in recordings, confirm blind transfers, pick the caller ID a transfer destination sees, keep far ends from dropping on comfort-noise hold, investigate calls with AI troubleshooting, and look up inbound caller names with enhanced CNAM.
What's new
- SIP registration status: The SIP Connections list shows whether each credential or SIP Attach (UAC) connection is registered, with the same data available from the SIP Registration Status API.
- Continue recording on hold: Include hold time in call recordings for inbound calls and outbound calls.
- Confirm blind transfer: Keep the original call up while the destination rings, and release the transferring party only when the destination answers.
- Caller ID for transfer target: Choose whether the transferee's or the transferor's number is presented to the transfer destination on SIP REFER transfers.
- Generate RTP on comfort-noise packets : Send silent RTP during comfort-noise gaps so far-end PBXs don't drop calls on hold.
- AI troubleshooting in the SIP call debugger: Get an AI-generated summary and timeline for a call, then ask follow-up questions in plain English.
- Enhanced inbound CNAM: Look up caller names for more US calling numbers, including names longer than 15 characters.
Why it matters
SIP Trunking problems are quiet until they're expensive. A dead registration looks like a one-way-audio ticket. A transfer that rings into voicemail looks like a customer who hung up. And root-causing a bad call means replaying packet captures by hand. These controls put registration state, transfer behavior, hold media, and first-pass call analysis directly in Mission Control, so a telephony admin can answer "what happened on that call?" in minutes instead of through escalations.
Example use cases
- Telephony admins verify a PBX migration actually registered before switching over call routing.
- Support engineers investigate dropped calls, missing audio, and call quality with an AI summary instead of parsing SIP traces.
- Compliance-heavy callers like finance and healthcare teams keep hold time in recordings for audit completeness.
- Support desks control which number a transfer destination sees, so customer callbacks reach the right team.
Getting started
- Check registration in Mission Control under Voice → SIP Trunking → SIP Connections.
- Record on hold: Voice → Services → Call Recording (inbound) or your Outbound Voice Profile → Configuration (outbound), then select Continue recording on hold.
- Configure transfers: open your SIP connection → Configuration → Advanced → Confirm blind transfer and Caller ID for Transfer Target.
- Troubleshoot a call: Debugging → SIP Call Flow Tool → open Call Data Debugging → Flow tab → AI troubleshooting.
- Enable Enhanced CNAM: Numbers → My Numbers → edit the receiving number → Voice → Services → Inbound caller name lookup → Enhanced.
Enable the connection-level settings with the API:
Check registration from the API:
Support articles












