The dimensions of all parts on the stage are measured simultaneously, so there is no need to measure each part individually. There is also no need for a fixture.
Fast Measurements
1Simultaneously Measure up to 1000 Target Parts
2Parts Can Be Measured Regardless of Orientation on Stage
The location and orientation of the part placed on the measurement stage are automatically detected.
There is no need for precise positioning of the part.
Easy and Fast Operation
Easy Operation with no Reference Point Alignment
Reference point alignment, the most troublesome operation for measuring microscopes and optical CMMs, is not required. After the part is placed on the stage, measurement can be started immediately while viewing the entire image.
1Intuitive Operation Allows Anyone to Use It
Includes a map navigation function that uses the stage camera to capture an overall image of the target. Anyone can intuitively use it, as you can use a whole image to find an area for measurement and then increase the magnification to specify the measurement points.
2User-friendly Menu Display for Easy Setup
The menu display shows dimensional measurements such as lines, circles, points, and virtual lines/points in an intuitive manner. Difficult-to-measure GD&T can also be measured with just one click.
Basic measurement
Virtual tools
Dimensional Measurement Examples
High Speed & Accuracy Measurement Examples
Lead Frames
- Pattern measurement
- Measurement of positions from reference holes
Flexible PCBs and Camera Modules
- Device position misalignment inspection
- Positional deviation measurement of mounted components
Mounted Components Such as Ceramic Capacitors, Crystal Oscillators, and ICs
- Measurement using reference lines
- Pitch measurement
Connectors, Cases, and Plastic Precision Moulded Parts
- Measurement using reference lines
- Pitch measurement
Process-specific Measurement Examples
CASE 1 Inspections of Prototypes and First Off-tool Parts
- Improved productivity through reductions in launch periods
- Measurements are possible regardless of inspector experience
- Measurements based on the traceability of international standards
CASE 2 In-process Inspections of Samples and Parts
- Improvement of equipment availability through reductions in setup time
- Improvement of yield rates through better accuracy in equipment adjustment
- In-process defect detection management
CASE 3 Incoming Inspections
- Can manage incoming inspections for multiple types with constant standards
- Reduce the risk of defects even when the quantity of inspections is increased
- Improved quality through measurement of previously un-inspected points
CASE 4 Pre-shipping Inspections
- Meet tight shipping inspection deadlines
- Reduce the work required to create inspection report tables
- Reduce training time and labour costs associated with inspectors
